Accessing The Cli Of A Specific Stack Member; Displaying Switch Stack Information; Troubleshooting Stacks - Cisco Catalyst 3750-X Software Configuration Manual

Chapter 5 Managing Switch Stacks

Accessing the CLI of a Specific Stack Member

This task is only for debugging purposes, and is only available from the master.
Note
You can access all or specific members by using the remote command {all | stack-member-number}
privileged EXEC command. The stack member number range is 1 to 9.
You can access specific members by using the session stack-member-number privileged EXEC
command. The member number is appended to the system prompt. For example, the prompt for
member 2 is
session on the master. Only the show and debug commands are available on a specific member.

Displaying Switch Stack Information

To display saved configuration changes after resetting a specific member or the stack, use these
privileged EXEC commands:
Table 5-4
Command
show platform stack manager all
show platform stack ports {buffer |
history}
show switch
show switch stack-member-number
show switch detail
show switch neighbors
show switch stack-ports [summary] Display port information for the stack. Use the summary
show switch stack-ring activity
[detail]

Troubleshooting Stacks

•
•
•
•
OL-21521-01
, and system prompt for the master is
Switch-2#
Commands for Displaying Stack Information
Manually Disabling a Stack Port, page 5-26
Re-Enabling a Stack Port While Another Member Starts, page 5-26
Understanding the show switch stack-ports summary Output, page 5-27
Identifying Loopback Problems, page 5-28
Accessing the CLI of a Specific Stack Member
Switch#
Description
Display all stack information, such as the stack protocol
version.
Display the stack port events and history.
Display summary information about the stack, including the
status of provisioned switches and switches in
version-mismatch mode.
Display information about a specific member.
Display detailed information about the stack ring.
Display the stack neighbors.
keyword to display the stack cable length, the stack link status,
and the loopback status.
Display the number of frames per member that are sent to the
stack ring. The detail keyword displays the number of frames
per member that are sent to the stack ring, the receive queues,
and the ASIC.
Catalyst 3750-X and 3560-X Switch Software Configuration Guide
. Enter exit to return to the CLI
5-25