Cisco Catalyst 3750-X Software Configuration Manual page 225

Chapter 8 Configuring SDM Templates
number of qos aces:
number of security aces:
This is an example of output from the show sdm prefer dual-ipv4-and-ipv6 routing command:
Switch# show sdm prefer dual-ipv4-and-ipv6 routing
The current template is "desktop IPv4 and IPv6 routing" template.
The selected template optimizes the resources in the switch to support this level of
features for 8 routed interfaces and 1024 VLANs.
number of unicast mac addresses:
number of IPv4 IGMP groups + multicast routes:
number of IPv4 unicast routes:
number of directly-connected IPv4 hosts:
number of indirect IPv4 routes:
number of IPv6 multicast groups:
number of directly-connected IPv6 addresses:
number of indirect IPv6 unicast routes:
number of IPv4 policy based routing aces:
number of IPv4/MAC qos aces:
number of IPv4/MAC security aces:
number of IPv6 policy based routing aces:
number of IPv6 qos aces:
number of IPv6 security aces:
OL-21521-01
0.5K
1K
1.5K
1K
2.75K
1.5K
1.25K
1K
1.5K
1.25K
0.25K
0.5K
0.5K
0.25K
0.5K
0.5K
Catalyst 3750-X and 3560-X Switch Software Configuration Guide
Displaying the SDM Templates
8-7