Cisco Catalyst 3750-X Software Configuration Manual page 69

Chapter 1 Overview
Default domain name is not configured. For more information, see
•
IP Address and Default Gateway."
DHCP client is enabled, the DHCP server is enabled (only if the device acting as a DHCP server is
•
configured and is enabled), and the DHCP relay agent is enabled (only if the device is acting as a
DHCP relay agent is configured and is enabled). For more information, see
the Switch IP Address and Default Gateway,"
Source Guard."
Switch stack is enabled (not configurable). For more information, see
•
Stacks."
Switch cluster is disabled. For more information about switch clusters, see
•
Switches,"
No passwords are defined. For more information, see
•
System name and prompt is Switch. For more information, see
•
Switch."
NTP is enabled. For more information, see
•
DNS is enabled. For more information, see
•
TACACS+ is disabled. For more information, see
•
Authentication."
RADIUS is disabled. For more information, see
•
Authentication."
The standard HTTP server and Secure Socket Layer (SSL) HTTPS server are both enabled. For more
•
information, see
IEEE 802.1x is disabled. For more information, see
•
Port-Based Authentication."
Port parameters
•
–
–
–
–
–
No Smartports macros are defined. For more information, see
•
Smartports Macros."
VLANs
•
–
–
–
–
OL-21521-01
and the Getting Started with Cisco Network Assistant, available on Cisco.com.
Chapter 10, "Configuring Switch-Based Authentication."
Operating mode is Layer 2 (switchport). For more information, see
Interface Characteristics."
Interface speed and duplex mode is autonegotiate. For more information, see
"Configuring Interface Characteristics."
Auto-MDIX is enabled. For more information, see
Characteristics."
Flow control is off. For more information, see
Characteristics."
PoE is autonegotiate. For more information, see
Characteristics."
Default VLAN is VLAN 1. For more information, see
VLAN trunking setting is dynamic auto (DTP). For more information, see
"Configuring VLANs."
Trunk encapsulation is negotiate. For more information, see
VTP mode is server. For more information, see
Default Settings After Initial Switch Configuration
and Chapter 24, "Configuring DHCP Features and IP
Chapter 7, "Administering the Switch."
Chapter 7, "Administering the Switch."
Chapter 7, "Administering the Switch."
Chapter 10, "Configuring Switch-Based
Chapter 10, "Configuring Switch-Based
Chapter 11, "Configuring IEEE 802.1x
Chapter 13, "Configuring Interface
Chapter 13, "Configuring Interface
Chapter 13, "Configuring Interface
Chapter 15, "Configuring VLANs."
Chapter 16, "Configuring VTP."
Catalyst 3750-X and 3560-X Switch Software Configuration Guide
Chapter 3, "Assigning the Switch
Chapter 3, "Assigning
Chapter 5, "Managing Switch
Chapter 6, "Clustering
Chapter 7, "Administering the
Chapter 13, "Configuring
Chapter 13,
Chapter 14, "Configuring Auto
Chapter 15,
Chapter 15, "Configuring VLANs."
1-17