Cisco Catalyst 3750-X Software Configuration Manual page 130

Configuring Cisco IOS Agents
Command
discover {controller controller-type | dlci
Step 7
[subinterface subinterface-number] | interface
[interface-type] | line line-type}
template name [ ... name]
Step 8
Step 9
Step 10 exit
Step 11
hostname name
Step 12
ip route network-number
Catalyst 3750-X and 3560-X Switch Software Configuration Guide
4-10
Chapter 4 Configuring Cisco IOS Configuration Engine
Purpose
Specify the interface parameters in the CNS connect
profile.
For controller controller-type, enter the controller
•
type.
For dlci, enter the active data-link connection
•
identifiers (DLCIs).
(Optional) For subinterface subinterface-number,
specify the point-to-point subinterface number that is
used to search for active DLCIs.
For interface [interface-type], enter the type of
•
interface.
For line line-type, enter the line type.
•
Specify the list of CNS connect templates in the CNS
connect profile to be applied to the switch configuration.
You can specify more than one template.
Repeat Steps 7 to 8 to specify more interface parameters
and CNS connect templates in the CNS connect profile.
Return to global configuration mode.
Enter the hostname for the switch.
(Optional) Establish a static route to the Configuration
Engine whose IP address is network-number.
OL-21521-01