Cisco Catalyst 3750-X Software Configuration Manual page 813

Chapter 35 Configuring SNMP
Command
Step 4
snmp-server user username groupname
{remote host [udp-port port]} {v1 [access
access-list] | v2c [access access-list] | v3
[encrypted] [access access-list] [auth {md5 |
sha} auth-password]} [priv {des | 3des | aes
{128 | 192 | 256}} priv-password]
Step 5 end
Step 6
show running-config
Step 7
copy running-config startup-config
OL-21521-01
Purpose
Add a new user for an SNMP group.
The username is the name of the user on th e host that connects
•
to the agent.
The groupname is the name of the group to which the user is
•
associated.
Enter remote to specify a remote SNMP entity to which the
•
user belongs and the hostname or IP address of that entity with
the optional UDP port number. The default is 162.
Enter the SNMP version number (v1, v2c, or v3). If you enter
•
v3, you have these additional options:
encrypted specifies that the password appears in
–
encrypted format. This keyword is available only when
the v3 keyword is specified.
auth is an authentication level setting session that can be
–
either the HMAC-MD5-96 (md5) or the HMAC-SHA-96
(sha) authentication level and requires a password string
auth-password (not to exceed 64 characters).
If you enter v3 you can also configure a private (priv)
•
encryption algorithm and password string priv-password (not
to exceed 64 characters).
priv specifies the User-based Security Model (USM).
–
des specifies the use of the 56-bit DES algorithm.
–
3des specifies the use of the 168-bit DES algorithm.
–
aes specifies the use of the DES algorithm. You must
–
select either 128-bit, 192-bit, or 256-bit encryption.
(Optional) Enter access access-list with a string (not to exceed
•
64 characters) that is the name of the access list.
Return to privileged EXEC mode.
Verify your entries.
To display SNMPv3 information about auth | noauth |
Note
priv mode configuration, you must enter the show snmp
user EXEC command.
(Optional) Save your entries in the configuration file.
Catalyst 3750-X and 3560-X Switch Software Configuration Guide
Configuring SNMP
35-11