Configuring Telnet; Figure 83 Telnet Configuration On A Tcp/Ip Network - ZyXEL Communications ZyXEL ZyAIR G-3000H User Manual

G-3000H User's Guide
Table 45 Remote Management: WWW
LABEL
Server Access
Secured Client IP
Address
Apply
Reset

12.3 Configuring Telnet

You can configure your ZyAIR for remote Telnet access as shown next. The administrator
uses Telnet from a computer on a remote network to access the ZyAIR.

Figure 83 Telnet Configuration on a TCP/IP Network

12.4 Configuring TELNET
Click REMOTE MGNT and the TELNET tab to display the screen as shown.
150
DESCRIPTION
Select the interface(s) through which a computer may access the ZyAIR using this
service.
A secured client is a "trusted" computer that is allowed to communicate with the
ZyAIR using this service.
Select All to allow any computer to access the ZyAIR using this service.
Choose Selected to just allow the computer with the IP address that you specify to
access the ZyAIR using this service.
Click Apply to save your customized settings and exit this screen.
Click Reset to begin configuring this screen afresh.
Chapter 12 Remote Management Screens