Examples Of Secure Telnet Using Ssh - ZyXEL Communications NWA50AX User Manual

16.5.5 Exa m ple s o f Se c ure T e lne t Using SSH
This section shows two examples using a command interface and a graphical interface SSH client
program to remotely access the Zyxel Device. The configuration and connection steps are similar for
most SSH client programs. Refer to your SSH client program user's guide.
16.5.5.1 Exa m ple 1: Mic ro so ft Windo ws
This section describes how to access the Zyxel Device using the Secure Shell Client program.
1
Launch the SSH client and specify the connection information (IP address, port number) for the Zyxel
Device.
2
Configure the SSH client to accept connection using SSH version 2.
3
A window displays prompting you to store the host key in you computer. Click
SSH Example 1: Store Host Key
Fig ure 94
Enter the password to log in to the Zyxel Device. The CLI screen displays next.
16.5.5.2 Exa m ple 2: L inux
This section describes how to access the Zyxel Device using the OpenSSH client program that comes
with most Linux distributions.
1
Test whether the SSH service is available on the Zyxel Device.
Enter "telnet 192.168.1.2 22" at a terminal prompt and press [ENTER]. The computer attempts to
connect to port 22 on the Zyxel Device (using the default IP address of 192.168.1.2).
A message displays indicating the SSH protocol version supported by the Zyxel Device.
Chapter 16 System
NWA50AX User's Guide
154
to continue.
Ye s