Specifying The Transmission Report Printing Condition - Konica Minolta bizhub 362 User Manual

IP Relay operations

Specifying the transmission report printing condition

The conditions for printing the transmission result report can be specified.
The conditions for printing the transmission result report are preset with the
"Report Settings" parameters from the Administrator Management 1 screen.
Follow the procedure described below to change these conditions.
1
Touch [Menu].
– If the optional fax kit has been installed, touch [FAX Menu].
2
Touch [TX Report] on the Setting 1
tab.
– If the optional fax kit has been
installed, touch [TX Report] on
the Set 1 tab.
3
Specify the desired printing
condition, and then touch [Enter].
bizhub 362/282/222
6
6-21