Scan to PC operations
4
Scan to PC operations
4.1
Before saving
Perform the following operations before using the Scan to PC operation.
Installing IP Scanner on the computer
When IP Scanner is installed, two utilities (IP Scanner and ImageReceiver)
are installed.
When the computer is restarted after the
utilities are installed, ImageReceiver starts
automatically, and its icon appears in the
Windows taskbar. When performing a
Scan to PC operation, make sure that
ImageReceiver has started normally. While ImageReceiver is running, its icon
appears in the Windows taskbar.
!
Detail
If ImageReceiver has not started up, start it up by clicking "Start",
pointing to "Programs" (or "All Programs"), then "IP Scanner", then
clicking "ImageReceiver".
Checking the network settings
If there is a DHCP server on the network, data may not be sent correctly
since IP addresses are automatically assigned to each computer. In this
case, specify a fixed IP address for the computer or use IP Scanner.
!
Detail
For details on installing and using IP Scanner and on checking the
scanned image, refer to chapter 4, "IP Scanner" on page 5-3.
bizhub 362/282/222
4
4-3