To Specify A Software Switch Setting - Konica Minolta bizhub 362 User Manual

Specifying management settings

To specify a software switch setting

1
After entering Administrator mode, touch [Admin. 2].
2
Touch [Software SW].
3
Touch [Mode Selection], and then
use the keypad to type in the mode
number.
4
Specify a mode setting by using
either bits or hexadecimal values.
– To specify the bits, touch [Bit
Selection], touch
to move the cursor to the bit to be
changed, use the keypad to
specify the bit, and then touch
[Enter].
– To specify the hex value, touch
[HEX Selection], use the keypad
or touch [A] through [F] to specify
the value, and then touch [Enter].
bizhub 362/282/222
or
8
8-13