Ip Relay Settings (Administrator Mode); Selecting The Ip Relay Station To Be Used - Konica Minolta bizhub 362 User Manual

Specifying settings using PageScope Web Connection
7.4

IP Relay Settings (Administrator mode)

When sending a fax as an IP relay, specify the IP address and domain name
of the relay machines. In addition, the main relay stations to be used can be
selected.

Selecting the IP relay station to be used

Select an IP relay station from the IP relay machines that have been
registered in advance.
For details on registering an IP relay station, refer to "Registering an IP relay
station" on page 7-32.
Settings can be specified for the following.
Parameter
IP Relay Destination
Relay Result Port
bizhub 362/282/222
Description
The IP address of the currently selected relay station ap-
pears. To change the relay station, click [Select].
Type in the number of the port that will receive the results.
If this number is changed, it will be applied after the ma-
chine is turned off, then on again.
7
7-29