Registering A Recipient; Programming A One-Touch Dial Button - Konica Minolta bizhub 362 User Manual

6
6.7

Registering a recipient

Programming a one-touch dial button

If a recipient is registered with a one-touch dial button, the transmission can
be sent easily and accurately.
Two types of recipients can be registered with a one-touch dial button: a
main recipient and secondary recipients, where the data is sent if the
transmission to the main recipient fails.
Note
If "Restrict One-Touch Editing" on the Administrator Set screen
(displayed from the Administrator Management 1 screen) is set to "ON",
if software switch settings were specified to limit registration of one-
touch dial buttons to the administrator, or if "Enhance Security" is set to
"ON", one-touch dial buttons can only be registered, edited or deleted
from Administrator mode. For details on the settings in Administrator
mode, refer to the User manual [Facsimile Operations]. For details on the
software switch settings, refer to "Specifying software switch settings
(machine functions)" on page 8-11.
!
Detail
Any of the following communication modes can be specified for the
secondary recipient.
- PC (E-mail)
- PC (Scanner)
- InternetFAX (Internet FAX)
- InternetFAX (IP-TX)
- InternetFAX (IP Relay)
- FAX (G3)*
* The communication mode can be specified if the optional fax kit is
installed.
Note
Certain communication modes may not be available, depending on the
machine settings. For details, check with the administrator.
6-30
IP Relay operations
bizhub 362/282/222