IP address faxing
3.2
Entering an address
The address of a recipient not registered in a one-touch dial button can be
entered directly to be specified.
Note
If software switch settings were specified to limit dialing, a fax cannot be
sent by directly typing in the address. For details on the software switch
settings, refer to "Specifying software switch settings (machine
functions)" on page 8-11.
To enter an address
1
Position the document to be scanned.
2
Press the [Fax/Scan] key.
3
Touch [Direct Input].
4
Select the communication mode.
Touch [Change Comm. Mode].
bizhub 362/282/222
3
3-9