Scan to PC operations
Specifying a recipient by touching a one-touch dial button
1
Position the document to be scanned.
2
Press the [Fax/Scan] key.
–
The screen that appears after the
[Fax/Scan] key is pressed can be
specified using the "Default
Screen" parameter in the User's
Choice screen. For details, refer
to the User manual [Copy
Operations].
3
Touch [One-Touch].
4
Select the index containing the
desired recipient, and then touch the
one-touch dial button.
–
To select an index, touch the tab
of the desired index, or touch
different tab.
–
For details on changing the index
names, refer to "Naming an
index" on page 3-37.
–
Multiple recipients can be specified for simultaneous transmission
with the same one-touch dial button. A maximum of 300 recipients
can be specified with a single one-touch dial button.
–
If software switch settings were specified to prevent broadcast
transmissions, a fax cannot be sent to multiple recipients. For
details on the software switch settings, refer to "Specifying
software switch settings (machine functions)" on page 8-11.
5
Specify the appropriate settings on
the Quality & Reduction tab
according to the document to be
sent.
–
For details, refer to "Specifying
the scanning quality and zoom
ratio" on page 4-14.
bizhub 362/282/222
or
to select a
4
4-5