Copying A One-Touch Dial Button - Konica Minolta bizhub 362 User Manual

IP address faxing

Copying a one-touch dial button

1
Perform steps 1 through 4 of the procedure in "To program a one-
touch dial button".
2
Touch the button for the one-touch recipient to be copied.
3
Touch [One-Touch], and then touch
[One-Touch Copy].
4
Touch the button where the one-
touch dial button settings are to be
copied.
– Select a one-touch dial button
where no settings have been
registered yet.
– To deselect the one-touch dial
button where the information is to
be copied to, touch the selected
one-touch dial button again.
5
Touch [Enter] in each screen until the initial screen appears.
bizhub 362/282/222
3
3-35