To Register An Ip Relay Station - Konica Minolta bizhub 362 User Manual

Specifying settings using PageScope Web Connection

To register an IP relay station

1
In the Administrator mode, click the Network tab.
2
Click [IP Relay Settings], then [IP Relay Destination Registration].
3
To register a new relay station, click a box where an IP relay station
address has not been registered ("---").
– To change registered settings, click an IP address that appears.
– To delete an IP relay station, select the check box for the IP relay
station to be deleted, and then click [Delete].
bizhub 362/282/222
7
7-33