Konica Minolta bizhub 362 User Manual page 152

5
No. Command
7 "Notify Settings"-"Error
Notify Settings"
8 "Receive Settings"–"RX
Display"
5-38
Description
Select this command to display the Error Notify Settings di-
alog box.
To send error notifications to another computer, select the
"Error notify to other PC" check box, type in the IP address
of the computer that will receive the notification, and then
click [OK].
To specify a port number, select the "Specify Port" check
box, and then specify the port number.
Specify the number of the SMTP port used by ImageRe-
ceiver on the computer to receive the notification (normally
"25").
Click [Test]. A test notification is sent to the specified recip-
ient.
If there is a check mark beside this command, a dialog box
appears, notifying the user that image data has been re-
ceived.
From the Image Confirmation dialog box, the viewer can be
started and the folder specified as the destination for sav-
ing images can be viewed. In addition, from this dialog box,
image data files can be deleted or renamed.
IP Scanner
bizhub 362/282/222