Control Panel - Breadman TR875 Instruction Manual

CONTROL PANEL

DISPLAY WINDOW
Shows your MENU cycle selection,
TIMER setting, crust COLOR, LOAF size
and process.
OPERATION/KEEP WARM LIGHT
The Operation Light next to the START/
STOP Button will illuminate while the
Breadman® Bread Maker is ON; when
the Breadman® is completed and in
Keep Warm phase, the Light will flash.
(UP) and (DOWN) Buttons
▲ t
Use this pair of Buttons to set the
TIMER.
Use this pair of Buttons to add or
subtract time displayed in the Display
Window.
Each time you press this Button,
▲
the Timer advances 10 minutes.
Each time you press this Button, the
t
Timer is set back 10 minutes.
6
MENU
Press this Button to select the cycle
you want out of the ten (1 to 10)
listed on the Control Panel. Each
time you press this Button, the
number of the cycle will change to
the next selection in the Display.
Press this Button until your choice is
indicated.
COLOR
Select the crust COLOR: Light,
Medium or Dark. The Breadman®
Bread Maker is preset to Medium.
Use this Button to select the
RAPID cycle for the MENU program
indicated in the Display.
LOAF
Select the LOAF size: 1.5 LB, or 2
LB. The Breadman® Bread Maker is
preset to 2 LB.
START/STOP
Press this Button to start the
chosen cycle and to begin the Timer
countdown. Press this Button for
a full second to reset the cycle's
TIMER setting or to cancel the cycle
in progress.
When you press any Button, you
should hear a beep. This lets you
know you've pressed hard enough to
activate your selection.