Maintain the finishing options
The reinforcement unit
Insert a new tape roll
Introduction
When the tape roll is empty while the printer is in stand-by, the following
message will appear on the display: 'RU tape empty'. Open the reinforcement
unit and replace the empty tape roll.
Remove an empty tape roll
Attention:
original reinforcement strips from Océ.
Open the side door of the reinforcement unit.
1.
[75] Opening the side door of the reinforcement unit
[75] Opening the side door of the reinforcement unit
Maintain the Océ TDS400-CS
To prevent damage to the reinforcement unit, only use the
273