Define The Ip Address - Oce TDS400-CS User Manual

Define the IP address

Introduction
Use the following procedure to define the IP address.
If the DHCP server is defined, you can skip this procedure.
Note:
Before you begin
Use the
'next/select' key to select a menu or a value.
How to define the IP address
Make sure you have access to the system settings.
1.
(see 'Access the system settings in the system menu' on page 119)
Navigate to 'Network settings' and select this menu.
2.
Navigate to 'Adapter 2' and select this menu.
3.
Navigate to 'IP address' and select this menu.
4.
The first three digits flash.
Enter the first three numbers with the
5.
and press the 'next/select' key to confirm the value.
The next three digits flash.
Enter the next three numbers with the
6.
and press the 'next/select' key to confirm the value.
The next three digits flash.
Enter the next three numbers with the
7.
and press the 'next/select' key to confirm the value.
The next three digits flash.
Enter the next three numbers with the
8.
and press the 'next/select' key to confirm the value.
The next three digits flash.
Navigate to the next network setting or press the 'on-line' key to turn the printer
9.
on-line again.
Result
The IP address is defined.
Prepare the Océ TDS400-CS for use
key, the key and the 'previous' key to navigate. Use the
key and the key
key and the key
key and the key
key and the key
121