Oce TDS400-CS User Manual page 256

Remove the empty core from the roll holder when you press the knob.
3.
Slide the roll holder in the new roll of media while pressing the knob. Make
4.
sure that the knob is at the right side and that the media is positioned as shown
in the figure below.
[70] Press the knob
[70] Press the knob
Align the roll with the correct lines on the roll holder while pressing the knob.
5.
The line must be visible.
Put the roll holder with the media in the lower paper compartment.
6.
[71] Reposition the roll
[71] Reposition the roll
256 User manual