Oce TDS400-CS User Manual page 286

If there are, remove the tape strips in the reinforcement unit.
4.
[94] Removing the tape
[94] Removing the tape
If the protection sheet is not on the reinforcement strip, there is no
Note:
mechanical error. You must insert a new tape roll (see 'Insert a new tape roll'
on page 273). If this error frequently occurs, you must call your Océ
representative.
Remove all tape between the rollers and the knives .
5.
Install a new trailing strip of tape between the rollers and the knives.
6.
286 User manual