Oce TDS400-CS User Manual page 180

Define job setting with the scroll wheel and scroll-wheel key only
Select 'Copy' or 'Scan-to-file' with the upper-left softkey.
1.
The five job templates appear.
Focus on a job template with the scroll wheel.
2.
A small diamond in front of a template indicates the focus of the scroll wheel.
Select a job template with the scroll-wheel key.
3.
The top 5 settings appear.
Find a setting with the scroll wheel.
4.
A small rectangle in front of a setting name indicates the focus of the scroll
wheel.
Select the setting with the scroll-wheel key.
5.
There are several types of settings. The behaviour of the scanner operator panel
and the definition of a setting depends on the type of setting you selected. You
can select one of the following types of settings.
A setting that contains two values only, like 'On' or ' Off'.
Change the value of the setting with the scroll-wheel key to change the
value of the setting. The value and icon changes.
A setting that contains a list of values, like 'Lighter/darker'.
Open the setting with the scroll-wheel key.
Define the required value with the scroll wheel. The value and icon changes.
Close the setting with the scroll-wheel key.
A setting that contains a list of settings, like 'Media'.
Focus on a setting with the scroll wheel. The bold text of a value indicates
the focus of the scroll wheel. The icon changes.
Open the setting with the scroll-wheel key. The list of values appears.
Open the setting with the scroll-wheel key.
Define the required value with the scroll wheel. The value and icon changes.
Close the setting with the scroll-wheel key.
You can enter a numeric value with the numeric keys. To enter a negative
Note:
numeric value, scroll to a negative value first and than enter the value with the
numeric keys.
Select 'Close' with the lower-scroll-wheel key.
6.
Repeat from step 4 to define the next setting.
7.
Use the 'Defaults' option at the lower-left key to set all settings of the job
Note:
template to default.
180 User manual