Oce TDS400-CS User Manual page 72

Authorisation
Only one key operator, system administrator or repro operator at a time is
authorised to change the settings.
An error message appears when a second user tries to log on to the key operator
mode or system administrator mode.
There is no limitation of users authorised to view the settings.
[13] Error message when a second user tries to log on
[13] Error message when a second user tries to log on
How to log on to the controller applications
1. From the 'File' menu, select 'Log on'.
2. Select the required user name.
3. Enter the password.
4. Click 'OK'.
You are now logged on as special user. When you are not logged on, you have
'Anonymous' user permissions. (see 'The Océ TDS400-CS users' on page 18).
The status bar at the bottom shows the user mode.
The logon is limited to one user only.
You must separately log on to each application.
Note:
How to log off from the controller applications
From the 'File' menu, select 'Log off'.
You return to the anonymous user mode. Log off from the controller
applications to prevent unauthorised use.
You must separately log off from each application.
Note:
72 User manual