Make A Copy With A Stamp - Oce TDS400-CS User Manual

Make a copy with a stamp

Introduction
A stamp is a pre-defined text you can set on every copy. The stamp function is
an option. Use Océ License logic to enable this option. Use the Océ Settings
Editor to define a maximum of 10 stamps and their default values.
Before you begin
If you must enter the same value for a setting very often, you can set this value
as the default value for that setting in the Océ Settings Editor.
After you press the start key, the scanner operator panel always shows the job
number and status of the job. A copy job appears temporarily in the printer
queue of the Océ Queue Manager, a scan-to-file job appears in the selected
destination of the Océ Scan Manager.
Copy jobs 195