Oce TDS400-CS User Manual page 269

System message
'Input flap open'
'Close input flap'
'Input flap open'
'Remove paper'
'Close input flap'
'Roll 1 empty'
'Open roll unit'
'Roll 2 empty'
'Open roll unit'
'Wait for folder'
'Folder is off'
'Folder belt full'
'RU tape empty'
Maintain the Océ TDS400-CS
Description / solution
The input flap is open. Close the input flap.
The input flap was opened during the print process. Remove the
media and close the input flap again
Replace the media on roll 1
(see 'Load the media' on page 252)
Replace the media on roll 2
(see 'Load the media' on page 252)
The communication between the printer and the folder starts up.
Please wait.
The folder is turned off. The communication between the printer
and the folder was not created.
Empty the folder belt.
The tape roll of the Reinforcement Unit is empty. Open the
reinforcement unit and replace the tape roll.
(see 'Insert a new tape roll' on page 273)
269