The finishing options
Introduction
The Océ ColorWave
printed output.
[22]
The 'Top delivery tray' can collect 50 - 100 A0 plain paper prints with a maximum
length of 48" [120mm].
Note: The media type you use influences the output capacity.
In the Océ Express WebTools you can define the default 'Delivery destination' for
your printed output.
If you select 'Top delivery tray' your printed output is by default delivered in the
■
standard 'Top delivery tray'.
If you select 'External output (back)' your printed output is by default delivered
■
at the back of the printer. In that case you must expand your printer with one of
the following finishing options.
Attention: If you use 2 inch media cores instead of the standard 3 inch media
cores, in most cases the printed output is automatically delivered at the back of
the printer. The installation of one of the finishing options is then mandatory.
™
600 is delivered with a 'Top delivery tray' to collect your
The finishing options
35