Table of Contents
Advertisement
Turn the two guide plates away from the pin roller and lock the two guide
2.
plates into their open position.
[76] Opening the guide plates
[76] Opening the guide plates
Remove the trailing strip of the old tape.
3.
[77] Removing the trailing strip of the old tape
[77] Removing the trailing strip of the old tape
Open the front side plate of the roll holder (remove the screw and the old
4.
kernel.)
Clean the reinforcement knives before you put in a new roll. See '(see
Note:
'Clean the reinforcement knives' on page 283)
274
User manual
Advertisement
Table of Contents
