Table of Contents
Advertisement
How to make a copy with a stamp
Place the original face down and right aligned.
1.
The scanner takes the original.
Define the job settings.
2.
[43] The stamp icon
[43] The stamp icon
Select 'Copy' with the upper-left softkey.
The copy job templates appear.
Open a copy job template with a left softkey.
The top 5 settings appears.
Scroll to 'Stamp' and open this setting with the left softkey.
Select a stamp with the scroll wheel.
Select 'Position' with the left softkey.
Select a position with the scroll wheel.
Select 'Size' with the left softkey.
Select a size with the scroll wheel.
Select 'Colour' with the left softkey.
Select a colour with the scroll wheel.
Define the number of copies and press the green start key.
3.
Result
The copy contains the selected stamp.
196
User manual
Advertisement
Table of Contents
