Oce TDS400-CS User Manual page 193

How to make multiple sets of copies sorted by set
Feed the first original face down and right aligned.
1.
The scanner takes the original.
Define the job settings.
2.
Select 'Copy' with the upper-left softkey.
The copy job templates appear.
Open a copy job template with a left softkey.
The 'Create set' option appears at the upper-right corner of the screen.
Select 'Create set' with the upper-right softkey.
The 'Cancel set' option appears at the upper-left corner of the screen. The
'Close set' option appears at the upper-right corner of the screen.
Scroll to 'Sort' and define 'By set' with the left softkey. This setting is
disabled after you press the green start key for the first time.
Scroll to another setting if necessary, select the setting with the left softkey
and define the value with the scroll wheel.
Define the number of copies and press the green start key.
You can not change the number of copies after you press the green start key
for the first time.
Feed the next original, define the enabled settings for this original if
necessary and press the green start key.
Repeat this step until all originals are fed.
Select 'Close set' with the upper-right softkey.
3.
Copy jobs 193