Define the network settings at the printer operator panel
About the network settings
Introduction
You can define the network settings of the network adapter at the following
locations.
The Océ Settings Editor
The printer operator panel of the Océ TDS400 printer.
Access the network settings
Before you can set the network settings, you need to enter the system menu.
Available network settings
You can use the following settings to define the network settings.
Dynamic Host Configuration Protocol (DHCP) server.
The DHCP protocol assigns Internet Protocol (IP) addresses in a network
automatically. If you do not use the DHCP protocol, enter the IP address
manually.
Internet Protocol (IP) address.
Subnetmask.
Gateway.
118
User manual