Define The Drawing Method - Oce TDS400-CS User Manual

Define the drawing method

Before you begin
Use the
'next/select' key to select a menu or a value.
How to define the drawing method
Press the 'on-line' key to turn the printer off-line.
1.
Navigate to 'Folding' and select this menu.
2.
Navigate to 'Input' and select this menu.
3.
Navigate to 'Method' and select this menu.
4.
Select 'Standard', 'Afnor' or 'Ericsson' .
5.
Press the 'on-line' key to turn the printer on-line.
6.
Finish copy and print jobs
key, the key and the 'previous' key to navigate. Use the
235