Table of Contents
Advertisement
Behaviour of the unused Océ TCS4 scanner and time-out settings
Introduction
The automatic behaviour of the scanner when the scanner is unused for a while
depends on two items, the status of the scanner and the values of the time-out
settings. You are advised to define the time-out settings in the following order.
Define the set time-out to the lowest value according to the sleep mode
time-out and the scanner operator panel time-out setting.
Define the scanner operator panel time-out to the middle value according to
the sleep mode time-out and the set time-out setting.
Define the sleep mode time-out as the highest value according to the set
time-out and scanner operator panel time-out setting.
Automatic behaviour of the unused Océ TCS4 scanner
The scanner operator panel was used for a copy or scan-to-file job.
The scanner operator panel returns to the home screen when the scanner
operator panel time-out expires. The settings are set to default. The scanner
enters the sleep mode when the sleep mode timer expires.
The scanner operator panel was used to copy a set.
The set will close when the set time-out expires. The scanner operator panel
returns to the home screen when the scanner operator panel time-out
expires. The settings are set to default. The scanner enters the sleep mode
when the sleep mode timer expires.
Prepare the Océ TDS400-CS for use
125
Advertisement
Table of Contents
