Oce TDS400-CS User Manual page 42

How to load the settings from a file
From the 'File' menu, select 'Open'.
1.
You can also click the 'Open' button on the toolbar.
The screen displays a dialogue box from where you can browse to the required
file.
Click the 'Apply' button.
2.
The settings are transferred to the system.
When you are logged on as a key operator, the system only loads the KO
settings.
When you are logged on as a system administrator, the system only loads the
SA settings.
Repro operators and anonymous users are not authorised to load the settings
from a file.
How to print a list of the current settings
From the 'System' menu in the Océ System Control Panel, select 'Print
1.
settings'.
A list of the current settings on the Océ Power Logic
42 User manual
®
controller is printed.