Introduction To Copy Jobs - Oce TDS400-CS User Manual

Introduction to copy jobs

Introduction
A basic copy job takes two steps. Feed the original and press the start key.
Every other type of copy job is called an extended copy job. An extended copy
job takes one additional step, define the copy job settings at the scanner
operator panel. When you turn the Océ TDS400-CS on or when you select
'Copy', the scanner operator panel shows five copy job templates. The copy job
templates provide access to the different settings per copy job template. When
you select a copy job template, the scanner operator panel shows the top 5
settings of the selected copy job template. The top 5 settings are the most often
used settings. You can define the top 5 settings for each copy job template with
the Océ Settings Editor. You can use the scroll wheel to see the other settings.
After you start a copy job, you can manage your jobs from the Océ Queue
Manager.
174 User manual