Table of Contents
Advertisement
The 'Destination properties' dialogue box opens.
[25] The Destination properties dialogue box
[25] The Destination properties dialogue box
Enter a name for the destination in the 'Name' text box.
3.
This name will appear on the scanner panel.
From the 'Type' drop-down list box, select 'On the controller'.
4.
Enter a path of the target folder in the 'Path' text box.
5.
You can also click the 'Browse' button to select the path.
Click 'OK' to accept the destination properties.
6.
Create a network destination with SMB
Create a shared folder on a workstation. For example c:\Scan.
1.
From the 'File' menu on the Océ Scan Manager, select 'New'.
2.
You can also click the 'New' button on the toolbar.
The 'Destination properties' dialogue box opens.
From the 'Type' drop-down list box, select 'SMB'.
3.
Enter the system name of the workstation where you created the shared folder
4.
in the 'System' text box.
Find the system name of the workstation on the control panel of the
Note:
workstation (Control panel - Network - Identification - System name)
144
User manual
Advertisement
Table of Contents
