The Finishing Options - Oce ColorWave 600 User Manual

Hide thumbs Also See for ColorWave 600:

Table of Contents

The finishing options

Introduction

The Océ ColorWave™ 600 is delivered with a 'Top delivery tray' to collect your printed

output.

The 'Top delivery tray' can collect 50 - 100 plain paper prints with a maximum length

of 48" [1200mm].

Note:

The media type you use influences the output capacity.

In the Océ Express WebTools you can define the default 'Delivery destination' for your

printed output.

If you select 'Top delivery tray' your printed output is by default delivered in the

standard 'Top delivery tray'.

If you select 'External output (back)' your printed output is by default delivered at

the back of the printer. In that case you could expand your printer with one of the

following finishing options.

Attention:

If you use 2 inch media cores instead of the standard 3 inch media cores, the printed

output is automatically delivered at the back of the printer. The installation of one of the

finishing options is then advised.

Chapter 2 - Get to know the printing system

Table of Contents