End of plot time out
Normally, print files end with an instruction that tells the printer that the file is
finished.
However, some print data files do not have an end-of-print instruction. In such
cases, the print is considered 'finished' when the printer does not receive any
more graphic commands.
The print time-out option sets the delay after which the print is considered
finished. You can choose among the following options: 15, 30, 180, or 500
seconds. The default is 180.
Defining the end of plot time-out
Press 'Program' to enter the main menu.
1
Select the 'C
2
Press 'next/select' to enter the 'C
3
Select the '
4
Press 'next/select' to enter the '
5
Select the '
6
Press 'next/select' to enter the '
7
Select the required plot time-out using the
8
Press 'next/select' to confirm the selected plot time-out.
9
Press 'Program' to exit the main menu.
10
Advanced menu functions
' item using the
ONFIGURATION
' item using the
DATA FORMAT
' item using the
PLOT TIME OUT
or
' menu.
ONFIGURATION
or
' menu.
DATA FORMAT
or
' menu.
PLOT TIME OUT
or
button.
button
button
button.
73