Display - EverFocus PARAGON FHD 16x4 User Manual

4.4 Display

You can display system and camera status on the live view screen. Follow the steps below:
1. Click the Display button
status. You can continue click on the button to switch among the display modes. There are
four modes provided: (1) Display both the camera and system status icons. (2) Display only
the camera status icons. (3) Display only the system status icons. (4) Hide both the camera
and system status icons.
2. The following icons will be displayed at the top-left side of each camera stream to show each
camera's status.
Recording
Alarm
3. The following icons will be displayed at the bottom of the monitor to show the system
status.
Audio On
No network 1
* The DVR features Auto HDD Retry mechanism. Once the HDDs have been installed, when
encounter HDD fail error (all installed HDDs failed simultaneously), the DVR will
automatically reboot to detect the installed HDDs up to 3 times. Please refer to Appendix G:
Auto HDD Retry Mechanism for more details.
on the OSD Root Menu to display the system and camera
Playback Fast forward
Motion Video loss
Audio Off
Sequence HDD failure*
Fast backward
Uninstall
Alarm Motion
HD temp. too high
46
PARAGON FHD 16x4
Back pause
Audio On
Video loss
Event