Monitor Display - EverFocus EDVR16D1 Instruction Manual

1 . 5 M o n i t o r D i s p
1 . 5 M o n i t o r D i s p
The status information of the cameras or machine will show up, and be located at
different places on the screen.
. Channel tag
1
A channel tag indicates the channel name of the screen.
. Event sign
2
Event signals which are small icons with a capital letter and red background show
the events on each screen. There are a total of 6 different signals:
Alarm event.
A
Alarm event shows on a channel if an ALARM is enabled for that camera in the
ALARM SETUP MENU and an alarm is triggered.
Motion event.
M
Motion event only shows up when the camera's MOTION is enabled in MOTION
SETUP MENU and the camera detects movement.
Video loss event.
V
Video loss event only shows when the camera's VIDEOLOSS is enabled in
VIDEOLOSS SETUP MENU and the camera signal is lost.
S Sequence sign.
Sequence sign shows up when the display is in sequence mode.
l a y
l a y
10 10 10 10