Ending A Call; Conference Calls; Placing A Conference Call - Nortel IP Phone 2002 User Manual

Standard
62

Ending a call

To end an active call, press the Goodbye button or place the handset on the
receiver.
In the following example, jdoe is conversing with mjane. mjane's caller ID
appears on the display. To end this active call:
• Jdoe presses the Goodbye button or places the handset on the receiver. The
call is released between jdoe and mjane. The call between jdoe and csmith is
left on hold. The information about the call between jdoe and csmith still
displays.
• Jdoe presses the Hold soft key to resume the conversation with csmith.

Conference calls

Use the IP Phone 2002 to connect calls to form a conference.
While you are on a call, you can initiate a conference call to connect new parties
to the call.

Placing a conference call

1 When you are on a call, press the Call soft key.
Your current call is automatically placed on hold.
2 Enter the new address.
3 Press the Send soft key.
NN42020-126 MCS 5100 Release 4.0
Note: You cannot end an emergency services call. Only emergency
services personnel can end an emergency services call.
Note: You cannot initiate a conference call while you are on an
emergency services call.
Standard 01.05 March 2009