Specifying Location; Standard; Configuring Language Preferences - Nortel IP Phone 2002 User Manual

Standard

48

Specifying location

You can access the system from different locations. For example, you can move to
another building or temporarily log on to another IP Phone. When you log on, the
system prompts you to select your location (from a predefined list). The location
is needed to correctly route emergency services. You can also change your
location by using the Config menu.
1 Press the Config soft key.
2 Use the up and down navigation buttons to choose the Location option and
press the Select soft key.
If you select Other as your location, a warning message appears "Warning: A
location was selected that can affect your emergency services. Display this
warning in the future?"
3
If you selected Other in step 3, select Yes or No.
If you select Yes, you are prompted each time you log on or when your
telephone or server resets. If you select No, you do not see this warning again.
4 Press the Ok soft key or press Cancel to return to the idle display.
5 If you receive a prompt to select a sublocation, follow the prompts to
continue.
The Back soft key returns you to the previous display.

Configuring language preferences

1 Press the Config soft key.
2 Choose the Language Preferences option and press the Select soft key.
3
Press Change and use the up and down navigation buttons to scroll through
the language options.
4 Choose your language option and press the Select soft key.
NN42020-126 MCS 5100 Release 4.0
Note: If you choose Other as your location and you must dial an
emergency number, there can be a delay in locating you.
Standard 01.05 March 2009