Choosing Your Location; Specifying Log On Time - Nortel IP Phone 2002 User Manual

Standard
38

Choosing your location

After you enter your password you are prompted to choose your location if the
IP Phone 2002 was provisioned into the database and a user was assigned.
Your system can serve different locations. For your safety, you must specify your
location so that emergency services can be routed to you if they are needed.
1 Scroll through the list of locations using the up and down navigation buttons.
2
Highlight your location choice and press Select.
3
If you selected Other in step 2, a warning message appears "Warning: A
location was selected that can affect your emergency services. Display this
warning in the future?" Select Yes or No. If you select Yes, then this warning
appears each time you log on or when your telephone or server resets. If you
select No, you do not see this warning again.

Specifying log on time

After you choose your location you can specify how long you want to stay logged
on.
1 To enter the amount of time you want to be logged on, press the third soft key
and change Days to Hours, as desired.
2
Press the Timed soft key to log on for the specified amount of time. The
system automatically logs you off after the specified time has elapsed.
To log on permanently, press the Login soft key to use the network provisioned
values.
After you log on, the idle display appears. The system automatically registers you
again and you remain logged on until you manually log off.
NN42020-126 MCS 5100 Release 4.0
Note: If you move your location, you can reset your location by using the
Config menu. For information about resetting your location, see
"Specifying location" on page
Standard 01.05
48.
March 2009