Nortel IP Phone 2002 User Manual page 107

Standard
Table 16 DHCP configuration parameters
Parameter
S1 IP
S1 PORT
S1 ACTION
S1 RETRY Count
S2 IP
S2 Port
S2 ACTION
S2 RETRY COUNT
VLAN (0=No, 1=Yes)
EAP(enable)
Data VLAN
Value
<valid Server IP address>
5000
1
1
<valid Server IP address>
5000
1
1
0
1-Yes
0-N, 1-Yes
Definition
Primary server (IP Client
Manager or Multimedia PC
Client) IP address
Primary server port
Primary action code (must
be configured to 1)
Primary retry count
Secondary server (IP Client
Manager or Multimedia PC
Client) IP address
Note: If you do not know the
secondary IP address, use
the primary IP address for
the secondary address.
Secondary server port
Note: If you do not know the
secondary port, use the
primary port.
Secondary action code
(must be configured to 1)
Secondary retry count
QoS 802.1q VLAN Tag
Service
Select Yes if the network
infrastructure supports
802.1x port-based network
access control.
Default 0 (for No)
Note: You are not prompted
for Data VLAN if PC port is
set to 0 for Off.
IP Phone 2002 User Guide
107