Stock Query; Configuring Stock Query - Nortel IP Phone 2002 User Manual

Standard
84

Stock query

You can configure your IP Phone 2002 to display stock quotes.

Configuring stock query

1 From the idle display screen, select the Servcs soft key.
2 Choose the Stock Query option and press the Select soft key.
3 Enter the symbol of the stock that you want to query.
The default mode for entering a stock symbol is alphanumeric. Use the left
navigation button to delete individual characters. The Clr soft key deletes the
entire line.
4 Press the Query button.
The display can change briefly to show that the query is in progress. When the
query is complete, the result appears.
5
Press the Save soft key.
6 Press the Add soft key to add this stock query to a bulletin that displays on
your screen.
NN42020-126 MCS 5100 Release 4.0
Tip: For quick selection, press the number on the dialpad that
corresponds to the menu item. Use the up and down navigation buttons
to scroll through the Configuration menu list. To reach the beginning of
the list, press the start (*). To reach the end of the list, press the pound
(#) button.
Note: Parameters that are specific to a line can be configured or viewed
using menu options. If several users are logged on to the telephone, then
the system prompts you to select your line button.
Note: To determine whether his feature is activated for your system,
contact your system administrator.
Standard 01.05 March 2009