Configuring The Ignore Action; Configuring The Dialpad Characters - Nortel IP Phone 2002 User Manual

Standard

Configuring the ignore action

You can configure the actions of the Ignore soft key. The Local setting stops an
incoming call from ringing on your IP Phone 2002. Any other devices defined in
your ring list continue to ring for the duration of the ring list before advancing to
the next ring list. The Network setting stops the incoming call from ringing on all
the devices that are defined in your ring list and forwards the call to the next ring
list if one was defined. For example, you can configure your ring list sequence to
go to your voice mail account.
1 Press the Config soft key.
2
Choose the Preferences option and press the Select soft key.
3
Choose the Ignore Action option and press the Change soft key.
4
Press the Ok soft key to change the Ignore Action option.
5 Press the Cancel soft key to exit.

Configuring the dialpad characters

You can change the dialpad character setting to the alphanumeric character set for
your language.
1
Press the Config soft key.
2
Choose the Preferences option and press the Select soft key.
3
Choose the Dialpad option and press the Change soft key.
4 Use the up and down navigation buttons to scroll through the options.
5 Choose your dialpad character set and press the Ok soft key.
6 Press the Cancel soft key to exit.
Tip: For more information about creating a ring list, see Personal Agent
User Guide (NN42020-100).
IP Phone 2002 User Guide
47