Basic Functions - Nortel IP Phone 2002 User Manual

Standard
54

Basic functions

Table 6 "Common functions" on page 54
you use everyday.
Table 6 Common functions
To
Place a call
Place a
conference call
Check a stock
quote
NN42020-126 MCS 5100 Release 4.0
Do this
1. Pick up your handset or press the Handsfree button
to go off-hook on the primary line (the green line
button).
2. Dial a phone number or enter an alphanumeric
address. See "Enter an address" on page
3. Wait briefly for the phone to place the call
automatically, or press the Send soft key.
4. Hang up the handset or press the
button to disconnect the call.
To place a call to an entry in your inbox, outbox, address
book or list of friends, see
on page 71.
1. After you make or receive a call, press the Call soft
key to invite an additional party to the conversation.
2. Dial a phone number or enter an address. The
second number rings.
3. Wait for an answer, then press the Join soft key.
4. Hang up the handset or press the Goodbye soft key
to disconnect from the conference.
1. Select the Servcs soft key.
2. Use the navigation buttons to select the Stock
Query feature from the display area.
3. Use the dialpad to enter the symbol of the stock you
want to query. If you make a mistake, reenter the
symbol and the previous entry is deleted.
4. Select the Query soft key to start your query. After
the query is complete, the quote appears on the
display.
Standard 01.05
lists the steps for some of the functions
56.
Chapter , "Call management,"
March 2009