Configuring The Im Display; Configuring The Search Method - Nortel IP Phone 2002 User Manual

Standard
46

Configuring the IM display

You can choose to block incoming instant messages so that the text does not
appear on the telephone display. Instant messages are not blocked by default.
1
Press the Config soft key.
2 Choose the Preferences option and press the Select soft key.
3 Choose the IM Display option and press the Change soft key.
4 Press the Ok soft key to change the IM Display option.
5 Press the Cancel soft key to exit.

Configuring the search method

You can select the method to search for entries in your address book, inbox and,
outbox. The choices are listed in
Table 5 Search methods
Index Search
1st Character Search
Name Search
1 Press the Config soft key.
2 Choose the Preferences option and press the Select soft key.
3
Choose the Search Method option and press the Change soft key.
4
Select a search method from the list.
5
Press the Ok soft key to change the search option.
6 Press the Cancel soft key to exit.
NN42020-126 MCS 5100 Release 4.0
Enter the number associated with the entry.
Enter the first character of the entry.
Enter all of the characters of an entry name.
Tip: For information about using the search function, see
addresses" on page 57.
Standard 01.05
Table 5 "Search methods" on page 46.
"Search for
March 2009