Initializing Your Ip Phone 2002 - Nortel IP Phone 2002 User Manual

Standard

Initializing your IP Phone 2002

When you power on the IP Phone 2002 for the first time, you see the introduction
screen with a flashing Nortel Networks display as shown in
screen" on page
Figure 5 Introduction screen
Table 4 Initialization
If this occurs when you power up your
IP Phone 2002
The display shows that the server is
unreachable and continuously resets.
Server unreachable restarting ...
The telephone connects to the server and the
display prompts you to enter an activation key.
Activation key >
Ok
35.
Nortel Networks
Tip: Your IP Phone 2002 can be preconfigured or can require a partial or
total initialization. See
Alpha
06/06 9:31 am
Table 4 "Initialization" on page
Do this
Follow the instructions in
"Appendix D: DHCP parameter
configuration" on page
Go to "Enter an activation key" on
page 36.
Lang
IP Phone 2002 User Guide
35
Figure 5 "Introduction
35.
105.