Installing Your Ip Phone 2002 - Nortel IP Phone 2002 User Manual

Standard
34

Installing your IP Phone 2002

1 Connect one end of the handset cord to the handset jack (identified with a
handset icon) on the telephone base and connect the other end of the handset
cord to the handset.
2 Choose one of the following connections:
a
b For a telephone that shares a LAN access with a PC:
3 Plug the AC adapter into the base of the telephone.
4 Plug the AC adapter into the nearest electrical outlet.
5 Ensure that your power cable and handset cable are properly fitted into the
provided slots.
6
Fit the base and hinge it into the plastic slots at the front of the telephone and
press down firmly until the base snaps into place.
NN42020-126 MCS 5100 Release 4.0
Warning: Severe damage occurs if your IP Phone 2002 is plugged into
an ISDN connection. Contact your administrator to ensure that you plug
the telephone into a 10/100BaseT Ethernet jack.
For a telephone that does not share a LAN access with a PC:
Connect one end of the Ethernet cable to the Ethernet plug (identified
with a network icon) on the telephone and the other end to your
10/100BaseT Ethernet jack.
Complete step a and connect one end of a second Ethernet cable to the PC
Ethernet port (identified with a PC icon) on the back of the telephone and
the other end to the computer's Ethernet port.
Tip: If you have trouble locking the base, or if the phone is not level on
your desktop, ensure the cables to the telephone are not obstructing the
base.
Standard 01.05 March 2009